Imate žicu za učenje?

Cisco CIPT2 8.0: Bandwidth Management and CAC Implementation

Overview/Description Individual sites of a multisite deployment are usually interconnected by an IP WAN in situations in which bandwidth is relatively costly and bandwidth consumption should be minimized. Call Admission Control (CAC) is also important in a multisite environment in order to avoid bandwidth oversubscription by too many voice calls. This course describes methods of reducing bandwidth requirements and explains how to design and implement those methods so that the IP WAN bandwidth can be used as efficiently as possible. It also describes CAC options for intrasite calls and...

Cisco CIPT2 8.0: Call Control Discovery

Overview/Description With the increasing deployment of Cisco Unified Communications solutions, dial plans have become more complex to implement, especially in large enterprises that consist of numerous call control devices. Some examples of these call control devices are Cisco Unified Border Element, Cisco Unified Survivable Remote Site Telephony (SRST), Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, and Cisco IOS gateways. To simplify dial plan implementation in large deployments, it is desirable that call control devices dynamically exchange call-...

Cisco CIPT2 8.0: Centralized Call-Processing Redundancy Implementation

Overview/Description The capability to use centralized call-processing devices that are located at remote sites depends on the availability of Cisco Unified Communications Manager (CUCM) at the main site. To provide these devices with a backup, you can use Media Gateway Control Protocol (MGCP) fallback and Cisco Unified Survivable Remote Site Telephony (SRST). This course describes the mechanisms for providing call survivability and device failover in remote sites. It describes how to configure Cisco IOS routers as Cisco Unified SRST gateways and how to use Cisco Unified Communications...

Cisco CIPT2 8.0: Features and Applications for Multisite Deployments

Overview/Description Users in multisite environments often roam between sites. When such users take their Cisco Unified Communications endpoints (E.g. Cisco Unified Wireless IP Phone or Cisco IP Communicator (a softphone) phone) with them, the standard configuration of their endpoints must be adapted to suit the needs of the current physical location. It is important that a professional unified communications system provides such a solution. Similarly, users can roam between office desks or sites on a regular basis.Using phones that are provided at the sites that they visit, these users...

Cisco CIPT2 8.0: Multisite Deployment Implementation

Overview/Description Cisco Unified Communications Manager (CUCM) multisite deployments can use various connection options between sites. Multisite dial plans have to address special issues, such as overlapping and nonconsecutive directory numbers, public switched telephone network (PSTN) access, PSTN backup, and tail- end hop-off (TEHO). This course describes multisite deployment connection options and explains how to configure them. Also covered in this course is how to build multisite dial plans using CUCM and Cisco IOS gateway configuration. The concept of globalized call routing - a new...

Cisco CIPT2 8.0: Multisite Deployment Issues and Solutions Overview

Overview/Description In a multisite Cisco Unified Communications Manager (CUCM) deployment, special requirements exist that are not necessary in single-site deployments. Deploying Cisco Unified Communications solutions among multiple sites requires an appropriate dial plan, adequate bandwidth between sites, implementation of quality of service (QoS), and a design that can survive IP WAN failures. To successfully deploy a multisite CUCM solution, you need to understand the issues and be aware of their possible solutions. This course discusses the issues in a multisite CUCM deployment,...

Mentoring 642-457 Implementing CUCM, Part 2 (CIPT2)

Overview/Description SkillSoft Mentors are available to help students with their studies for exam 642-457 Implementing CUCM, Part 2 (CIPT2). You can reach them by entering a Mentored Chat Room or by using the E-mail My Mentor service. Target Audience Individuals who are studying the associated SkillSoft content in preparation for, or to become familiar with, the skills and competencies being measured by the actual certification exam. Prerequisites Familiarity with the exam objectives listed below and skills and competencies being measured in the associated certification exam. Expected...

Koraci do učenja

1Prijavi se

Prijavite se, a ako nemate korisničko ime, registrirajte se.

2Pronađi i upiši program

Pronađite edukacijske programe u Katalogu i Certifikaciji, ili koristite polje za pretragu.

3Uči

Upisani programi dostupni su u meniju Korisnik, Moji tečajevi.

»Detaljne upute

Trebate pomoć?